Slip and Friction testing aids in the evaluation of chemicals and additives used to create or minimize the degree of friction between two contacting test specimens.
TMI 32-07 Friction Tester
Slide Angle Friction is a measurement of a sheet like substrate such as paper, corrugated, plastic film or paperboard which determines the angle of inclination at which one substrate affixed to a sled will begin to slide/slip against another substrate of a similar material.
During a test, an inclined plane is increased at a rate of 1.5 ± 0.5º per second by an electric motor until the test block begins to slide. The initial movement of the sled is the Slide Angle or Coefficient of Static Friction of the material. When the test block just begins to slide a photo-optical sensor automatically stops the inclined plane and the operator can read the slide angle result.
A variety of factors can affect the Slide Angle measurements including abrasion, coatings, varnishes, printing and most importantly humidity.
ASTM D 1894, ISO 8295, TAPPI T 549, TAPPI T 816
- Selectable speed from 5 to 50.8 cm per minute (2 to 20 in per minute)
- Selectable travel distance from 2.5 to 30.5 cm (1 to 12 in.)
- Load Cell: 14.7 newtons (1.5kg, 3.3lbs)
- Meets TAPPI T816, T549, and ASTM D1894
|Depth:||502 mm (19.75 in.)|
|Height:||406 mm (16 in.)|
|Width:||679 mm (26.75 in.)|
|Weight||25 kg (55 lb)|
- Digital display, storage and editing of up to 100 readings, and selectable units (COF or grams)
- Settable limits
- Statistics-average, standard deviation, high/low results.
- Report printout with built in printer
- Static and kinetic coefficient of friction calculated in one operation.
- Direct drive arm with unique skid control.
- Sled-connecting mechanism ensures level pulling action.
- Easily interchangeable sleds.
- Full color easy to read display
Only logged in customers who have purchased this product may leave a review.